Description
Where Ceiling Curtain Track Is Used
Overhead Curtain Systems for Industrial Spaces
Ceiling curtain track gives you a clean, floor-free way to divide large open areas. Warehouses, manufacturing plants, and distribution centers use industrial curtain track mounted overhead to create flexible work zones, temperature barriers, and dust containment areas. The track bolts directly to the ceiling structure, keeping aisles and floor space completely clear for forklifts, equipment, and foot traffic.
Problems Ceiling-Mounted Track Solves
Open floor plans in industrial buildings lose energy, spread dust, and create safety hazards. A ceiling-mounted track system lets you hang heavy vinyl or insulated curtains that block airflow between heated and unheated zones. Paint shops use ceiling track to contain overspray. Welding areas use it to shield adjacent workers from UV exposure and sparks. Wash bays rely on the galvanized steel construction to resist moisture and chemical exposure without corroding.
Custom Layouts and Sizing
Every ceiling track system is quoted to your exact measurements. Straight runs, L-shapes, C-shapes, and full enclosures are all available with 90-degree radius corners. Support brackets mount every 3 to 5 feet depending on load. Contact us for a free layout quote based on your facility dimensions.
Frequently Asked Questions
Can ceiling curtain track support insulated or heavy vinyl curtains?
Yes. Steel roller hooks on ceiling curtain track support up to 75 lbs each (2-wheel) or 125 lbs each (4-wheel). Insulated curtains, heavy vinyl strips, and welding curtains all work with the appropriate hook type. Spacing hooks every 12 inches distributes the weight evenly across the track.
What mounting hardware is needed to install ceiling curtain track?
The track mounts directly to ceiling joists, trusses, or steel beams using wood screws, lag bolts, or Tek screws every 3 to 5 feet. All end stops and set screw connectors are included. The only tools required are a drill, tape measure, and level.
Is galvanized ceiling curtain track suitable for wash bay or wet environments?
Yes. The hot-dip galvanized steel construction corrodes at 1/30 the rate of bare steel. Car washes, food processing plants, and industrial wash-down areas commonly use this track. The enclosed design also protects the roller hooks from water and debris.
Can ceiling curtain track go around corners or create a full enclosure?
Yes. 90-degree radius corners with a 24-inch turn radius allow curtains to roll smoothly around corners. You can create L-shapes (1 corner), C-shapes (2 corners), or full 4-sided enclosures. 45-degree corners are also available for angled layouts.
How far apart should ceiling curtain track support brackets be spaced?
Standard spacing is every 5 feet. For heavier curtains or loads, reduce spacing to every 3 feet. Lighter applications can extend to 8 feet between supports. Your quote will specify exact bracket placement based on curtain weight and track length.
What is the gap between the ceiling and the top of the curtain?
The gap between the track bottom and curtain top is approximately 1 to 3.75 inches, depending on the roller hook type and curtain attachment method. This small gap is normal and does not affect containment for most dust control and temperature separation applications.
Can ceiling curtain track be used for warehouse zone separation with forklifts?
Yes. Ceiling-mounted track keeps all hardware overhead, leaving the full floor-to-ceiling opening clear for forklift traffic. Curtains can be pushed open and closed as needed. This is one of the most common applications in warehouses and distribution centers.
Does ceiling curtain track ship with everything needed for installation?
Track ships with end stops, set screw connectors, and roller hooks. Mounting hardware (screws, bolts, or beam clamps) depends on your ceiling structure and is sourced locally at any hardware store. Orders ship in 3 to 5 business days via UPS or FedEx.
Can I paint ceiling curtain track to match my facility color?
Yes. The plain galvanized steel surface accepts standard metal spray paint. Apply paint directly to the track after installation. The galvanized coating still protects against corrosion underneath the paint layer.
What is the maximum length for a single run of ceiling curtain track?
There is no maximum length. The modular bolt-together design lets you connect track sections end to end for runs of 10 feet to 500 feet or more. Each joint uses a set screw connector that keeps the inside of the track smooth for roller hook travel.
Description
Your industrial curtain track hardware kit includes all the components that you need to hang your curtains. Once you place your order we will email you an order confirmation with all of the components itemized for you to review. Please note that the track is not cut to the exact sizes you input on the form. Track pieces will ship out in stock sizes and are made to be field cut with a hacksaw or power saw. Components included with your kit include.
- Nylon roller wheels spaced every 12″
- Track supports for spacing every 5′
- Straight track sections that splice together
- End stops to keep rollers inside of the track
- Optional – 90 Degree radius corner
- Optional – 90 Degree hard corner
- Lifetime Warranty
How the Track Assembles
- The track slips together and is bolted with set screws for a rigid construction.
- The track can also be cut down to your exact size once it arrives.
- Track supports are provided for every 5′ but you can space them out wider if needed
Material
- 16 gauge hot dipped galvanized steel
- Nylon roller hooks have a 40 lb load rating
- Steel track is rated for 100 lbs per linear foot
Choose From 6 Support Styles
Dimensional Drawings
Lead Time
- Ships in 3-5 work days
- Ships UPS or FedEx. You can also specify your shipping account
- Once you place your order we will email you an order confirmation with all of the components itemized for you to review.
Warranty
- Lifetime warranty on manufacturing defects
